If you didn't know Hankook RS-3 are back ordered till who knows when. So out of nowhere these showed up in the back of a shop that you would never expect to find them at!
Friday, September 16, 2011
Thursday, September 15, 2011
New Updates
I promise to catch up on the blog but I have out of the country for work and the countries I happened to be in wouldn't allow me to post up on here.
On another note our .com is up. www.hangar9k.com
Nothing is there besides a picture but hopefully well have it up and running with a small store and some more blog style entries!
On another note our .com is up. www.hangar9k.com
Nothing is there besides a picture but hopefully well have it up and running with a small store and some more blog style entries!
Monday, September 5, 2011
Usual Suspects 2
Meet Ryan he is one of my best friends who happens to be a dick head, for lack of better words. But around here thats okay, and you know the phrase every dog has his day? Well Ryan's day was last week when he scored his Mugen intake for pretty much nothing, and I wanted to break it when I found out but, its all good now. His car has been through a bunch of wheels and changes lately but its starting to settle down into something finally. Ryan is also jumping on board trying to help out with the blog he happens to be pretty knowledgeable about things.
New For Sale Item
My friend Shawn is trying to sell his Invidia Q300. The price is $400.00 USD for it. Its located in Paducah KY. He really needs to sell this so he can move up to a single! So Let your friends know who may be interested!
Contact can be made at jarpower@gmail.com and I can send you his way!
Contact can be made at jarpower@gmail.com and I can send you his way!
Monday, August 29, 2011
Swap Talk part 4.2 The Final Edition
Friday I was working on the car some more until I had enough of sweating, but all and all it was going smooth. That day I managed to hoist the engine and transmission up and get everything lined up, during this process, I made sure I had all the correct length hardware for the mounts to avoid another situation. So the next day I woke up and was ready to get back to work, I went outside and it seemed as if I had a break in the weather, so I decided there was no time to waste. I went to NAPA and picked up some coolant and Castrol Syntec, my choice of oils, ran home and started. The engine and transmission was already mounted, all that lacked was all the under car stuff so since that is worst part of the day having to lay under the car. Then I finished the accessories, intake manifold, and the finishing touches. Then it was the moment of truth to start it up, at this point I was nervous thinking of what was in store for me, maybe some wires got snagged, fuel was going to leak, oil might leak, coolant leak, or worst of all maybe the engine might bad. I primed the engine twice, no fuel leaked and then bumped the engine to try and get some oil flowing, finally went for the initial start and it cranked, cranked, cranked then started and it was the most beautiful sound, as I watched the air/fuel looked spot on and the engine sounded great very quiet and tight. Then I checked for some leaks, none! Quickly took it off jack stands, put the bumper on, pulled it out of the garage and bled the cooling system. It was time to take it for a drive, again I was worried, who knew what was going to happen. It went perfect, engine felt real strong, then I drove some more and it was time to take it to 9200 rpm's and just like it was advertised it ran so perfect! I will not lie I was very proud that swap didn't take longer than it did and I didn't run into issues after the fact. I want to thank everyone who made this possible now. My wife Misty, Serda, Grady, Ryan, Billman and everyone else. It was nice to finally drive the car again on our "date night". If you hadn't seen the video, it's in the previous post on here. I'm a little behind on posting some more stuff on here, but I'll be catching up the next few days.
Swap Talk part 4.1
Finished the swap finally and everything works very well!!! Ill finish up the swap talk topic tonight as well as share some more stuff from this weekend. But heres a video to enjoy until later on tonight!
Friday, August 26, 2011
Swap Talk part 3
So today was good and bad, not much to say. I'm still behind where I wanted to be. I want to say thanks again to Grady for help and thanks to Billman from S2KI! The engine should be bolted to the car tomorrow, we got the transmission all lined up, bolted to the engine and slid it underneath the car in the most sketchy manner. On a positive note, I got another chance to try and clean the engine and transmission so that's good. Im really hoping we haven't fucked anything up I can't see yet. I called Billman because I noticed that the flywheel had some end play that was also noticed on the crank pulley. He said it was normal and I heard over the phone, him replicate the issue on a engine he recently built. This is caused from the engine sitting so long and not having any oil in it at the time. He was also kind enough to spot off the tolerances of this..... I want to get this done, it has consumed too much time now. Last but not least for the day, I got all of my Honda parts in from Honda Parts Unlimited, and I still need to buy some oil. I got another day at work, that will drag on and on and I'll be done for the weekend! I'm tired of sweating, bottom line messing with this thing.
The Box |
Well packaged |
Wednesday, August 24, 2011
Swap Talk part 2
So today went well for the first half, then it went down in flames. Justin came over and we had the engine out in a very short time. We rigged another sketchy bridle for the engine that worked pretty damn good. Once the engine was out, we took our time and swapped all the little bits over to the new one and I made some kind of attempt I guess you could say, to clean it up some. Then we decided to start installing the new engine. It started off fairly well, but quickly took a turn for the worse, reason being is the bastard child transmission put a .357 to my head and the .357 was the throw out bearing and clutch release fork. I hate the transmission, its such a pain in the ass and I'll be damned if I didn't run into the same problem as when I put the AP2 transmission in, the release bearing falling down and the clutch release fork getting stuck towards the aft of the transmission. So tomorrow is another day and the problem will be solved, it just sucks working in the heat with all the humidity here in the south, and I just want to finish something when I start it. On a side note, I figure we're past the halfway point, and the thermostat and radiator cap came in today. I also found some Urea grease when I grabbed a couple tubes of Honda Bond. Tomorrow I hope to have it just about near completion or completed. I still have some obstacles to tackle such as re tuning it and I'm sure all the shit that will have to be tinkered with before it's perfect. Im really tired tonight and have some refresher class at work tomorrow that will be painful.
First time the engine hasn't been attached since it was built. |
Check out the ramps we used |
Thanks again to Innovative mounts for this sweet oil leak out of the engine mount bolt |
The goods |
Giving the new engine a half ass bath |
No Heart :( |
New Engine going in! we used the Fram filter for cleaning and then tore it up on the subframe |
How it sits over night |
Dirty old engine palletized waiting to go to a new home 123000 good miles and memories |
Tuesday, August 23, 2011
Dragon Getaway
First off, I am so jealous if you live close enough to the dragon where you can up and go for a day or two, no problem. This is a first on this blog that someone sent me some pictures of their car before they posted it anywhere else, so this is cool for sure and Thank You. I'm sure most of you have seen Dressed2Kill's car before and it always has a nice setup. Recently he has changed a few things up and I think it was a change for the better, not that it was bad before. Anyway, he went to the Dragon recently and snapped a few pictures of his car for us and you might notice the front bumper, it's an Amuse bumper with Chargespeed canards, you don't see that often and then of course, the Voltex wing. The front fenders are OEM that have been made wider by 30mm. I really like the OEM fenders so it's cool to see a wider setup done this way. The wheels are Advan RS with NT01 tires and a pair of Project Mu 4 pots lurking behind the spokes. He has some custom spring rates on his Tein Flex coilovers that I had thought about doing to mine while I had them, but never got around to it. One thing I have always noted on his car is his attention to little details, last time I saw it in person I took a close look behind the over fenders and saw the quality of how his fenders had been cut. Then there's other little details like his headlights where the diffusers had been tinted. Enough with the car! enjoy some pictures of it!
Overnight parts from Japan?
Not really, but from Texas! My engine shipped out yesterday and got here this morning, of course it was shipped terminal to terminal, but still I cant believe how quick it got here. It was packaged and palletized very professionally and then we got ahold of it. I called Grady and let him know it was here, so he brought the engine lift over to my house and was driving the white trash mobile. I think some more pictures need to be posted of this thing to gather the whole spectrum of it. It would randomly stop running, shook like the earthquake today above 70mph, it also had a hole in the 4x4 shift boot area that allowed heat to roll in the cab, the best part minus the nerf bar was how your arm would get dirty resting it on the window seals. So anyway, we roll down to UPS terminal which is in the hood, pull up to the gate and the truck dies, then we make our way in and go in the wrong door, just to be redirected to go outside and go to the other side of the room basically, then stand there behind the window and wait while people stared at us from the other side. Finally, we got someone to help us, they called a forklift driver to go pick the pallet up. I was concerned at first because they knew my name when I said I was here to pick something up. Usually thats a bad sign, but it was all good. The pallet was loaded in the back of the white trash mobile and our journey back home started, after we got the white trash mobile to start again when we had to stop at the guard shack again. Once on the expressway, some guy kept trying to talk to us at 70 mph that we didn't know, a real southern gentleman. The next problem was getting it out of the truck, the engine was bolted to the pallet and we had the engine lift ready. We jerry rigged two straps under the pallet that were too short, so then we proceeded to use a chain to hook the straps to and then hooked the lift to it and it managed to work. Unboxed it and called it a day. Hopefully I'll find time to work on the car tomorrow. Im really excited.
Usual Suspects
I am trying to expand, revise, and improve this blog. So Im decided to invite my friend Grady to give his input to this blog. He always keeps very clean minty cars (2006 Rio), in fact last week several of us went to his house to shoot our rifles. When we arrived he was working on a swap for his daily and I swear on anything that he said and was polishing bolts........ But anyways he is a big help from logistics to just lending a hand and hanging out at the house.
Thursday, August 18, 2011
Swap Talk part 1
Todays Sky |
Tuesday, August 16, 2011
Mounts Version 2
I was bored the other day and remembered back in 2002 that I wanted an Ultimate Racing turbo kit for my S. I don't see much of their stuff anymore so I went to their website and scored this find - Engine mount rings. Then a few nights ago, I came across the Spoon engine rings and were interested in them. I'm done trying the ETD engine torque dampeners and Innovative Mounts and their techs and this woman that answers the phone fails at life, but I think the white car needs a little improvement, because mounts do make a difference, as far as handling and feel. So the Spoon's are about $185 or so and these are $125, so not a huge difference but definitely worth giving a shot. Other than that, I know nothing about these or know anyone that runs or has talked about these. If you do give me some input!
Heres the link to Ultimate Racing where I came across these http://www.ultimate-racing.com/Products2/S2K/S2K_EngineMountRing.shtml
And of course the Spoon engine mount rings http://www.spoon.jp/eng/details.php?id=669&md=s2000&cid=1
And of course the Spoon engine mount rings http://www.spoon.jp/eng/details.php?id=669&md=s2000&cid=1
Subscribe to:
Posts (Atom)